J525 Welded Hydraulic Tube

July 18, 2017
Posted in

J525 Welded Hydraulic Tube

J525 Welded Tubing with a wide variety of sizes in stock. J525 is typically used when the high-quality hydraulic tubing is required.

Clear Selection To Choose Again!

Description

 J525 Welded Hydraulic Fluidline – J525 JIC Hydraulic Welded Steel Tubing

J525 Tubing, welded low-carbon steel tubing annealed for bending and flaring with many uses. Used for pressure lines in applications requiring high-quality tubing for bending, flaring, forming, and brazing. Typical uses include Heavy Equipment, Agriculture, Off-Road Vehicles, Automotive, Steering and Transmission components, Process and Utility, and other Hydraulic applications.

The manufacturing process of our J525 high-pressure tubing includes several cold-drawn reductions, intermediate anneals, and then a dead-soft anneal after final sizing. The resulting tubing is consistent of high quality that is easy to bend and flare.

Much like J524, J525 is used in hydraulic applications, both with the same chemical and mechanical properties. The difference is that J525 is welded starting as flat stock. Where flaring is a requirement, J524 Seamless is typically the preferred product. However, both are of high quality and have comparable specifications.

  • SAE J-525
  • ASTM A-214 (Except Average Wall)
  • ASME SA-214 Except (Average Wall)
  • Addenda EN10204 3.1.B
  • PED Certified
  • OD x ID
  • Uniform Lengths
  • Dual certified Fluidline

CHEMICAL PROPERTIES

Element
%
Carbon
0.06-0.18
Manganese
0.30 to 0.60
Phosphprus
0.040 max
Sulfur
0.050 max

MECHANICAL PROPERTIES

Properties
Value
Yield Strength,min
170 Mpa
Ultimate Strength,min
310 Mpa
Elongation in 50mm, min
35%
Hardness ( Rockwell B),max
65.00

OUTSIDE DIAMETER TOLERANCE

Nominal Tubing OD mm
Tolerance OD mm
Tolerance ID mm
Up to 9.50
0.05
0.05
Over 9.50 to 15.88 inclusive
0.06
0.06
Over 15.88 to 50.80 inclusive
0.08
0.08
Over 50.8 to 63.50 inclusive
0.10
0.10
Over 63.50 to 76.20 inclusive
0.13
0.13
Over 76.20 to 100.00 inclusive
0.15
0.15

WT tolerance shall be not more than 10%

TUBING WALL THICKNESS TOLERANCE

Nominal Wall Thickness
Nominal OD Through 22mm mm
Nominal OD 22-48mm mm
Nominal OD 48-100mm mm
0.89
0.05/0.05
0.05/0.05
0.05/0.05
1.00
0.05/0.05
0.05/0.08
0.05/0.08
1.25
0.05/0.05
0.05/0.08
0.05/0.08
1.50
0.05/0.05
0.05/0.08
0.05/0.08
1.65
0.05/0.05
0.05/0.08
0.05/0.08
2.00
0.05/0.05
0.05/0.08
0.05/0.08
2.11
0.05/0.05
0.05/0.08
0.05/0.08
2.410
0.05/0.05
0.05/0.08
0.08/0.08
2.500
0.05/0.08
0.05/0.10
0.08/0.08
2.770
0.05/0.08
0.05/0.10
0.08/0.08
3.000
0.05/0.08
0.05/0.10
0.08/0.08
3.050
0.05/0.08
0.05/0.10
0.08/0.08
3.40
0.05/0.10
0.08/0.08
3.75
0.05/0.10
0.08/0.08
4.00
0.08/0.10
0.08/0.10
4.19
0.08/0.10
0.08/0.10
4.57
0.10/0.10
0.08/0.13
5.00
0.10/0.13
0.10/0.13

Please visit Welded and Cold-Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring at SAE International® for more J525 standards.

Additional information

Length

Contact Karay Metals, Inc.





Subscribe me your mailing list

Subscribe To Our Newsletter




Request Latest Metal Tubing Stock List



Subscribe me your mailing list

Find Your Product Here

Fill out the Contact form at the bottom of all pages, or mail kevin@karaymetals.com, or call (845) 679-3385 x 711, 9-5 EST.

 

Another Method:

  1. Visit Tubing Catalog and Select a Product.
  2. Select OD, ID, and Wall Thickness
  3. Select Quantity
  4. Click “ADD ITEM TO YOUR QUOTE”
  5. Visit Quote List or Cart Icon
  6. Complete Form
  7. Click “Request Quote button.