Steel Products
Karay Metals, Inc. is a global supplier of high quality steel products.
Our ISO 9001 and QS9000 certified mills supply welded, seamless and DOM (Drawn over Mandrel) steel products.
We offer cold finished steel bar in carbon grades from our new facility, and will be supplying low alloy grades in the future
>>Go Back
Seamless Steel Tube
Cold Drawn Hydraulic Fluidline
SAE J524b - ASME / ASTM / SA / A179 (Average Wall)
3/16" to 4" OD
Seamless Mechanical Tubes
ASTM A519 - Cold Drawn
1/4" to 6" (max 3/4" wall) -cold drawn
up to 16" OD - hot finished
Seamless Condenser/Boiler Tubes
Cold Drawn / Hot Finished
ASTM / ASME / SA / A
A179, A192, A210, A213, A344, A200 A209, A334
5/8" to 5" OD
Cold Drawn Diesel Injection Tubes
SAE J529 & 1925
1/4" to 3/8" OD
Seamless Stainless Tubes
ASTM A269, A213, A312, A511
T304/L, T316/L, T321, T347, T410
Cold Drawn/ Hot Finished
1/4" to 8-5/8" (max .625")
Special Shapes - Seamless
Cold drawn tubing
From 1/4" OD
>>Go Back
Welded Steel Tubing
Cold Drawn Hydraulic Fluidline
SAE J525b / ASME / ASTM / SA / A214 (Average Wall)
3/16" to 3" OD
ERW DOM Mechanical Tubes
ASTM A513 T5
C1008, C1010, C1012, C1020, 1021, 1026,
1035, 1524, 1541, ST52.3
Other JIS - DIN - BS grades on request
1/4" to 4" OD (.022" to .219" Wall)
Special Smooth Inside Diameter Tubes
ASTM A513 T6 (SSID)
See DOM for grades
1/4" to 4" OD
Carbon Condenser/Boiler Tubes
ASTM/ ASME SA / A178, SA / A214, SA / A423
5/8" to 4" OD
Automotive Tubing
QS 9000 Certified
º" OD - 4" OD (.022" to .219" Wall)
We offer tubes for chassis, axle, shock absorber, struts, drive shafts, steering columns, and various assemblies and components. We also offer special cut lengths.
Fabricated Tubes
Cutting (from 1" length), piercing, drilling, flanging, grooving, forming, bending and other fabrication for a finished tube per your requirements.
Profile/Shaped Tubing (Cold Drawn)
3/8" OD to 8" OD
Square, oval, rectangular, and other shapes on request
Tapered Steel Shafts
For lighting, transmission, high mast up to 65,000 psi min yeald
max .375" wall x 32" bottom OD
max 50ft in one piece
>>Go Back
Cold Finished Steel Bar
Size Range:
(rounds only)
1.5" OD to 4." OD
turned (mid 2005)
cold finished, turned & ground (3Q 2005)
Grades:
C1045 (mid 2005)
C1018, C1035, (4Q 2005)
ST52.3
1140, 1141 (2006)
1215 (2006)
4140, 5115, 6150 (annealed only)
special grades on request
>>Go Back
|
